Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Pembroke Pines?
Garage door spring replacement in Pembroke Pines typically costs between $180 and $340, depending on the specific spring type, wire diameter, and the weight of your garage door. We provide a written, flat-rate price before we touch a single tool, ensuring you know exactly what you are paying for before work begins.
At Servo Garage Doors, we operate under The Haven Standard. Clause 1 of our standard requires that every job is quoted with a flat, written price and a clear scope of work before any technician begins the repair. We do not believe in “call for a quote” games or on-site price hikes. When you call us at (954) 280-1425, you are getting an honest assessment from a technician who understands the specific demands of the Pembroke Pines climate.
Spring Replacement Cost Breakdown (2026)
The cost of replacing a garage door spring is determined by the engineering requirements of your door. A heavier, insulated door requires a spring with a higher wire gauge and different coil dimensions than a standard, non-insulated door. We stock a range of springs to ensure we can match the exact specification needed for your door’s balance.
| Service Item | Estimated Price Range |
|---|---|
| Standard Torsion Spring Replacement (Single Spring) | $180 - $260 |
| Standard Torsion Spring Replacement (Pair) | $260 - $340 |
| Extension Spring Replacement (Per Pair) | $180 - $280 |
| High-Cycle Spring Upgrade (Longer Life) | $220 - $340 |
| Torsion Conversion (Extension to Torsion) | $350 - $600 |
These prices include the labor and the parts. We do not charge extra for “service calls” on top of the repair price. When we arrive, we evaluate the door, we show you the evidence of the failure, and we give you the price. This is Clause 4 of The Haven Standard: you see the failed part before we quote a replacement. If we cannot show you the wear or the break, we will not recommend a replacement.
What Affects Spring Replacement Pricing in Pembroke Pines
Several factors influence the final cost of your repair. Understanding these helps you make an informed decision about the maintenance of your door.
- Spring Type: Torsion springs (mounted above the door) and extension springs (mounted along the tracks) have different costs. Torsion springs are generally preferred for their smoother operation and safety, but they are engineered differently.
- Door Weight: The heavier the door, the larger the spring diameter and length required. A custom wood carriage-style door found in some neighborhoods in Pembroke Pines will require a heavier-duty spring than a standard steel sectional door.
- Wire Diameter: The thickness of the steel wire determines the lift capacity and the life cycle of the spring. We measure your existing spring’s wire diameter to ensure the replacement matches your door’s weight specifications exactly.
- Pembroke Pines Humidity: Our local climate accelerates metal fatigue. Moisture and salt air can cause rust, which creates friction between the coils. We often recommend high-cycle, oil-tempered springs in this area to resist corrosion better than standard galvanized options.
- Hardware Condition: If the spring has failed, it often puts stress on other components like the center bearing, cable drums, or rollers. While we quote based on the spring, we always inspect these components and document their condition for you.
BeforeAfterWhy Servo Garage Doors Uses Written Upfront Pricing
The garage door industry is filled with companies that use “call for a quote” as a tactic to get a technician to your door, only to upsell you once they are there. That is not how we operate. As an independently owned and operated business under The Haven Standard, we believe that trust is earned through transparency, not sales scripts.
Every job we perform, whether it is a Spring Replacement in Pembroke Pines or a full installation, follows the same documented process. When our technician arrives, they do not start by talking about price. They start by opening the garage door, checking the system, and locating the failure. They then photograph the failed component. This photo becomes part of the record we provide to you. You see the break in the spring, the rust on the coils, or the wear on the cables before we ever suggest a price.
This evidence-based approach is why we have completed over 18,000 successful repairs since 2015. We don’t guess, and we don’t inflate prices. We provide the facts, we provide the written scope, and we provide the solution. If you have received a written estimate from another company, we offer a Free Second Opinion. Bring the paperwork to us, and we will review it against our own findings.
The Anatomy of a Garage Door Spring
Many homeowners are surprised to learn that the garage door opener does not actually lift the door. The springs do the heavy lifting. The opener is merely the steering wheel-it tells the door where to go and when to stop. The springs, which are under immense tension, store the mechanical energy required to counterbalance the weight of the door.
There are two primary types of spring systems:
Torsion Spring Systems
These springs are mounted on a shaft above the garage door opening. When the door closes, the cables attached to the bottom of the door pull on the drums, which rotate the shaft and wind the springs. This stores energy. When the door opens, the springs unwind, releasing that energy to help lift the door. In Pembroke Pines, we see many torsion systems because they are safer and more balanced than older systems.
Extension Spring Systems
These springs are mounted on the side of the horizontal tracks. They stretch when the door is closed and contract when the door is open. Because they operate by stretching rather than winding, they are generally considered less stable than torsion systems. If an extension spring breaks, it can be more dangerous, which is why we always recommend safety containment cables for these setups.
Regardless of the system, the spring is the most critical part of your garage door. If it is the wrong size, the opener will struggle, the motor will burn out prematurely, and the door will be unbalanced. This is why we measure wire diameter, inner diameter, and length before installing any replacement.
Safety First: Understanding the Risks
Garage door springs are under high tension. They are designed to lift heavy doors, and they store significant mechanical energy. Attempting to adjust, remove, or replace these springs without the proper tools and training is dangerous. We strongly discourage homeowners from attempting this repair themselves.
When a spring breaks, it is often accompanied by a loud “bang” that can sound like a firecracker or a gunshot. This is the sound of the metal snapping under load. When this happens, the door is effectively dead weight. Do not attempt to force the door open or closed. If your car is trapped inside, do not pull on the emergency release cord while the door is under tension, as the door could come crashing down. Call a professional. We are available 24/7 to handle these emergencies.
How We Replace Your Springs
Our process is designed to be systematic and safe. We follow a strict procedure to ensure the door is balanced correctly and the hardware is sound.
- Initial Assessment: We arrive at your home and inspect the entire system, not just the spring. We look at the cables, drums, rollers, and the opener.
- Documentation: Per Clause 4 of The Haven Standard, we photograph the failure. You see exactly what is broken before we proceed.
- Written Quote: We provide a flat, written price for the job. There are no surprises. You agree to the scope and the price before we start.
- Replacement: We use the correct winding bars and tools to safely release the tension on the old springs. We remove the old hardware and install the new, properly sized springs.
- Balance Test: Once the new springs are installed, we perform a balance test. A properly balanced door should stay in place when lifted halfway and released. If it drops or flies up, the springs need adjustment.
- Photo Record: After the work is finished, we photograph the completed installation. This documentation is provided to you, creating a record of the work performed for your home files.
How to Save on Spring Replacement
The best way to save money on garage door repairs is through proper maintenance. While springs have a limited life cycle-usually measured in “cycles,” where one cycle is one open and close-you can extend the life of your door system by keeping it balanced and lubricated.
However, once a spring breaks, there is no “repairing” it. It must be replaced. The best way to save is to avoid the “emergency” service fees by calling as soon as you notice an issue. If your door sounds like it is struggling or if one side of the door hangs lower than the other, call us at (954) 280-1425 for a free estimate. Addressing the issue before the spring snaps completely can save you from potential damage to your garage door opener or the door panels themselves.
We also advise against “patch” repairs. Some companies may suggest replacing only one spring when you have a two-spring system. We generally recommend replacing both springs at the same time. If one has reached the end of its life, the other is likely close behind. Replacing both at once saves you the cost of a second service visit later.
FAQs - Spring Replacement Cost
How much does it cost to fix a broken garage door spring in Pembroke Pines?
The cost typically ranges between $180 and $340, depending on the type of springs your door requires and whether you need a single spring or a pair replaced. We provide a flat-rate written price before we start any work, so you know exactly what the total will be. Call (954) 280-1425 for an exact quote for your specific door.
Can you replace my garage door springs today?
Yes, we offer 24/7 service and prioritize emergency calls. If your car is trapped or your garage is insecure, we aim to get a technician to your location promptly. Call (954) 280-1425 to check our current availability in Pembroke Pines.
Is it cheaper to replace one spring or both?
It is almost always more cost-effective to replace both springs at the same time. Springs are usually installed in pairs, and they go through the same number of cycles. If one has snapped, the other has experienced the same wear and metal fatigue and is likely to fail soon. Replacing both ensures your door remains balanced and saves you from paying for a second service visit later.
Do I need to be home for the spring replacement?
We prefer you to be home so we can show you the failed part and explain the work we are doing, but we can work with you to accommodate your schedule. Our technicians are background-checked and uniformed. We provide a documented photo record of the work, so you will see exactly what was done regardless of whether you are standing in the garage or not.
What brands of springs do you carry?
We carry high-quality springs compatible with all major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We match the spring specifications to your door’s weight and manufacturer requirements to ensure proper operation.
If you have any other questions about your garage door, please visit our home page to see our full list of services. We are here to help you get your garage door back in working order with the honesty and documentation you deserve.
Pricing reflects the Pembroke Pines market as of 2026. Servo Garage Doors Pembroke Pines offers free estimates - call (954) 280-1425.
Written by Marcus Deller, Owner at Servo Garage Doors, serving Pembroke Pines since 2015.
What Our Customers Say
"Cables came off the drum on a Sunday. Someone answered, someone came, and the written warranty was one page I could actually read."
- Harriet L."The report they email afterwards has the cycle count on the springs and roughly when to expect the next one to go. Genuinely useful."
- Miguel S."Opener had been stalling for months. The tech showed me the logic board reading, replaced the board instead of the whole unit, and it cost a third of the other quote I had."
- Robert K.