Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterClopay Torsion Spring Replacement: The Pembroke Pines Owner’s Guide
Clopay torsion spring replacement in Pembroke Pines typically runs $180-$340 installed, and we stock the springs and winding hardware on our trucks so the job is usually done same day. You’ll know the spring failed because the door suddenly won’t lift, even though the opener motor runs, and you’ll often hear a loud bang from the garage when it breaks. The door feels dead-heavy when you try to lift it manually because that spring was doing the real lifting, not the opener.
We’re an independent service provider, not affiliated with Clopay, but we’ve been matching and installing Clopay-compatible torsion springs across Pembroke Pines for years. When we replace one, we measure the old spring’s wire diameter, inside diameter, and length, then match the replacement to the door’s weight, not just to whatever was there before. Clopay doors ship with springs sized specifically to the door model and weight, and a spring that’s close but not right will cycle unevenly and wear out the opener. Marcus Deller, our owner, puts it plainly: “Name the part, quote the range, then fix it, in that order.”
Which Clopay Models This Applies To
Most Clopay residential doors in Pembroke Pines use one of two spring configurations: a single wide torsion spring or a pair of narrower springs mounted on the torsion tube above the door opening. The gallery series, classic steel pan doors, and the premium Reserve wood-look doors all run torsion systems, though the spring count and specs differ by door weight and width. A 16-foot double door typically runs two springs, while most single doors run one.
Here’s the compatibility gotcha: Clopay sources springs in specific wire-diameter increments, and the difference between a 0.243 and a 0.250 wire is enough to throw off the balance by several pounds. We don’t guess. We measure the old spring or the door weight before we quote, because a wrong tension means the door creeps up or slams down, and the opener burns out fighting it. On the OEM versus aftermarket question: we use torsion springs made to the same spec as what Clopay installed, with equivalent cycle ratings, because Clopay-branded springs aren’t always available quickly and the priority is a correct match, not a logo on the box. We also stock parts for the other major brands you’ll see in this area: LiftMaster, Chamberlain, and Genie.
Signs Your Clopay Torsion Spring Replacement Is Failing
- A loud bang from the garage, usually at night. Torsion springs break suddenly, not slowly. The sound is a sharp crack as the coil snaps under tension. If you heard it, the spring is done.
- The door won’t lift more than a few inches, if at all. The opener can’t compensate for the dead weight. Forcing it risks burning out the motor, so stop pressing the button once you’ve confirmed it won’t move.
- A visible gap in the spring coil. Look up at the spring above the closed door. If you see a clean separation in the coil or a stretched-looking section, that’s a break, usually right in the middle or near the end cone.
- The door feels heavy and drops quickly when released from the opener. With the emergency release pulled, a balanced door should lift with one hand. If it feels like lifting a boat anchor, the spring is no longer doing its share.
- The cables on either side are slack or off the drums. When a spring breaks, the cable tension drops and the cables can jump the pulleys. That’s a secondary symptom, and it needs to be corrected during the spring swap, not ignored.
BeforeAfterReplacement Cost & What’s Included
For Pembroke Pines homes, a Clopay torsion spring replacement runs $180-$340 installed. The range comes from the spring count (one versus two), the spring’s cycle rating, and whether the cables or bearing plates need attention while we’re on the tube. We quote a flat, written price before any work starts, per Clause 1 of The Haven Standard, and that price includes the spring, the labor, the rebalancing, and the documented photo record of what we found and what we replaced.
You’ll also see the warranty terms in writing before we begin. Our work carries the 365-Day Done Right Promise: if the spring or the install isn’t right, we make it right. That’s the standard we’ve held on every job since 2015 across more than 18,000 garage doors made right, every one with a written price before work started and a documented record when the tech left.
DIY or Call Us?
Torsion springs hold hundreds of pounds of stored torque. The winding and unwinding process can break bones or worse if a winding bar slips, and it’s one of the few garage door tasks where we’ll tell you flatly: do not attempt this yourself. A spring that looks identical to the old one can have a different wire spec, and an incorrectly wound spring turns a $200 repair into a door off its tracks and a damaged opener.
What you can safely do before we arrive: confirm the opener is unplugged, check whether the spring has a visible break, and write down the door model if the label is still on the panel near the bottom edge. Leave the winding bars in the drawer. That’s what we’re for. Call (954) 280-1425 and we’ll match the spring to the door, quote the flat price, and have it turning again the same day.
FAQs
Most Clopay torsion springs are rated for 10,000 cycles, which works out to roughly 7-10 years of normal use in a Pembroke Pines household. South Florida humidity and salt air shorten that for homes closer to the coast, so we regularly see 8-year-old springs with clean breaks, especially on doors that open and close multiple times a day. If your spring is in that age range and showing rust at the coils, it’s worth budgeting for a replacement. Call (954) 280-1425 and we’ll give you a flat, written price before anything gets touched.
No. A broken torsion spring is replaced, not repaired. Welding or splicing a spring under torsion load is unsafe and won’t restore the original cycle rating, so any honest tech will tell you the same: the old spring comes off, a correctly matched spring goes on. We photograph the failed one and the replacement, so you see exactly what changed. Call (954) 280-1425 for a free estimate on the swap.
Most Clopay torsion spring replacements in Pembroke Pines are done in 45-90 minutes once our tech is on site. The time depends on the door’s condition, whether both springs need replacing, and whether the cables need resetting, but we carry the springs and hardware on the truck so we’re not running back and forth to a supply house. We’ll give you the flat written scope before the first wrench clears the tool bag. Call (954) 280-1425 to schedule same-day service.
Yes. We carry a range of torsion springs in the wire diameters and inside diameters that cover most Clopay residential doors in Pembroke Pines, so we don’t have to order and come back next week. If your door is a less common size or weight, we’ll tell you upfront and still quote the flat written price before we leave to get the right spring. Call (954) 280-1425 for a free estimate, and we’ll confirm we have the match for your door.
Call Servo Garage Doors Pembroke Pines for Clopay Spring Replacement
When your Clopay torsion spring lets go, you want the right spring, the right price, and the proof of both. We’ve been doing exactly that in Pembroke Pines since 2015: a flat written price before any work starts, a photo of the failed part before we quote, and a documented record of everything we replaced. Our techs are background-checked and uniformed, and a live person answers our phone 24/7, including holidays and emergency calls. No callback window, no ‘call for a quote’ runaround. Call (954) 280-1425 and we’ll get the spring matched, the price in writing, and the door lifting again, same day.
Written by Marcus Deller, Owner, Servo Garage Doors Pembroke Pines at Servo Garage Doors Pembroke Pines, serving Pembroke Pines and nearby areas.